CERTIFICATIONS

ISOLCAP XX 500

PRE-MIXED, FIBER-REINFORCED, LIGHTWEIGHT AND THERMALLY INSULATING SUBFLOOR. 31.2 lb/ft³ (500 kg/m3)

ISOLCAP XX 500 is the fiber-reinforced lightweight pre-mixed subfloor for projects that need more strength without giving up insulation. At 31.2 lb/ft³ (500 kg/m³) and with polypropylene fibers it achieves a compressive strength of 325 psi (2.24 N/mm²) and forms a compact, cohesive layer, ideal as a single-layer screed under glued floors and where loads are higher.

Made with EPS beads coated with E.I.A. additive, selected aggregates and fibers, it keeps a thermal conductivity of λD 0.72 BTU·in/(h·ft²·°F) (0.104 W/(m·K)). It does not settle, does not shrink and does not crack.

At 2 in (5 cm) thickness ceramic tiles can be laid after about 5 days and floating parquet after about 10 days; after 28 days the residual moisture is below 2%, which makes it suitable for wood-frame buildings too.

It is mixed with a drill and whisk, a cement mixer or a mixer, and pumped to the floor with POLITERM® MACHINE, ISOLCAP MACHINE, a properly fitted plastering machine or a truck mixer and concrete pump. With DBRED FONOTECH 5 it contributes to impact sound reduction (ΔLw 17 dB). Reaction to fire A2-s1,d0.

NOTE

Zero hygrometric shrinkage
No bleeding
Dimensionally stable
Ultra-low residual moisture
No cracking
RAL certified
High mechanical strength and excellent cohesion of the layer

Dry density 31.2 lb/ft³ (500 kg/m³).
Thermal conductivity λD 0.72 BTU·in/(h·ft²·°F) (0.104 W/(m·K)) (UNI EN 12667).
Compressive strength 325 psi (2.24 N/mm²); flexural strength 113 psi (0.78 N/mm²) (UNI EN 1015-11).
μ 10.2.
ΔLw 17 dB (2 in (5 cm) + DBRED FONOTECH 5, calculated).
Reaction to fire A2-s1,d0; rot-proof.
Residual moisture after 28 days < 2% by volume.
Laying at 2 in (5 cm): ceramic after about 5 days, floating parquet after about 10 days.
Mixing water 2.6-2.9 gal (10-11 L) per bag.
Yield 13-14 bags per 35.3 ft³ (1 m³); 2.5 ft³ (70 L) bag; pallet of 40 bags (102-109 ft³ (2.9-3.1 m³)).
Minimum thickness 2 in (5 cm).

PACKAGING

Single-layer lightweight screeds for floor coverings laid with adhesive (ceramic, porcelain stoneware, clinker, terracotta, parquet). For glued parquet, a KRONOS AUTOLIV skim coat (min. 0.197 in (5 mm)) is mandatory.
Lightweight thermally insulating subfloors, with or without slopes.
Lightweight infill and leveling layers.
Roof insulation (pitched or flat), suitable for direct laying of waterproofing membranes or solvent-free liquid membranes.
Not suitable for direct laying of resilient floor coverings.

DOWNLOADS