KRONOS AUTOLIV 5-30

PRE-MIXED SELF-LEVELING FINISHING COAT FOR LOW-PROFILE APPLICATIONS. 5-30 MM

KRONOS AUTOLIV 5-30 is the self-leveling compound for greater thicknesses, from 0.197 to 1.18 in (5 to 30 mm): it corrects larger differences in level and creates, in a single pass, a flat and very strong surface ready for any floor covering.

A mineral mortar based on Portland cement and selected quartz, it is applied by hand or by machine and reaches very high strength (C45-F7, ≥ 6,527 psi (≥ 45 N/mm²) in compression). It is ideal for leveling cement screeds and POLITERM® BLU and ISOLCAP lightweight subfloors.

It is walkable after about 24 hours; ceramic and terracotta can be laid after about 48 hours, parquet, resilient floors and natural stone after about 7 days. Below 0.197 in (5 mm) use KRONOS AUTOLIV (0.039 to 0.394 in (1-10 mm)).

NOTE

Thickness 0.197 to 1.18 in (5-30 mm); consumption 10 lb/ft² per inch of thickness (1.95 kg/m² per mm).
Mixing water 0.99-1.1 gal (3.75-4.25 L) per 55 lb (25 kg) bag; pot life ≥ 30 minutes.
Application temperature 41 to 95 °F (+5 to +35 °C).
Walkable after about 24 h; ceramic/terracotta after about 48 h; parquet, resilient and natural stone after about 7 days.
Compressive strength C45 (≥ 6,527 psi (≥ 45 N/mm²)); flexural strength F7 (> 1,015 psi (> 7 MPa)).
Adhesion to concrete ≥ 73 psi (≥ 0.5 N/mm²) (28 days), also after freeze/thaw cycles.
55 lb (25 kg) bag; pallet of 48 bags (2,646 lb (1,200 kg)).

PACKAGING

Leveling of cement screeds with high strength, creating a surface suitable for PVC, carpet, laminate, ceramic and epoxy or polyurethane resins.
High-strength leveling of POLITERM® BLU and ISOLCAP subfloors before laying ceramic tiles, stoneware, natural stone and wooden floors.
Mandatory skim coat for glued parquet on ISOLCAP single-layer screeds.
Not to be used as a finishing layer outdoors or for heavy traffic.

DOWNLOADS