ARIETE 250 F®
THERMAL Insulation & Chemicals Division

CERTIFICATIONS

Emission
RAL
THERMAL Insulation & Chemicals Division

ARIETE 250 F®

PRE-MIXED, LIGHTWEIGHT AND THERMALLY INSULATING SUBFLOOR. 15.6 lb/ft³ (250 kg/m3)

ARIETE 250 F® is a pre-mixed, lightweight thermally insulating subfloor made of selected binders and virgin EPS beads (Ø 0.079 in (2 mm)) coated with the E.I.A. additive. It fills and levels the floor build-up over pipes and services, insulating the slab while keeping the load on the structure low.

Only water is added on site: the beads mix and pump evenly, the subfloor does not shrink over time and it reaches a residual moisture below 2% – an ideal base for radiant floor heating and for timber structures, where excess water must be avoided.

It is also used to insulate pitched and flat roofs, with or without slopes, and takes prefabricated waterproofing membranes or solvent-free liquid-applied membranes directly.

NOTE
  • Zero hygrometric shrinkage
  • No bleeding
  • Dimensionally stable
  • Ultra-low residual moisture
  • No cracking
  • RAL certified

 

  • Dry density: 15.6 lb/ft³ (250 kg/m³) (dry mortar approx. 16.5 lb/ft³ (265 kg/m³)).
  • Thermal conductivity λD: 0.45 BTU·in/(h·ft²·°F) (0.065 W/(m·K)) (UNI EN 12667).
  • Compressive strength: 120 psi (0.83 N/mm²) (UNI 6132); flexural strength: 67 psi (0.46 N/mm²) (UNI EN 13892-2).
  • Impact sound improvement ΔLw: 14 dB (UNI EN 12354-2; laboratory value with 2 in (5 cm) ARIETE 250 F® + 2 in (5 cm) screed).
  • Water vapor resistance μ: 6.9; specific heat: 1.0 kJ/kgK; rot-proof.
  • Residual moisture after 28 days: < 2% by volume.
  • Reaction to fire: A2-s1,d0 (EN 13501-1).
  • Mixing water: 1.8-2.1 gal (7-8 L) per bag; minimum thickness on absorbent substrates: 2 in (5 cm).
  • 2.5 ft³ (70 L) bags; pallet of 44 bags; 13-14 bags per 35.3 ft³ (1 m³) (≈ 109-120 ft³ (≈ 3.1-3.4 m³) per pallet).
PACKAGING
  • Lightweight thermally insulating subfloors, with or without slopes, including under radiant floor heating.
  • Lightweight infill layers.
  • Thermal insulation of pitched and flat roofs, with direct laying of waterproofing membranes or solvent-free liquid-applied membranes.
  • Mixing with drill, cement mixer or horizontal mixer; pumping with Politerm® Machine, Isolcap Machine, plastering machine, truck mixer and concrete pump or screed pump.
DOWNLOADS
SHARE

KEEP IN TOUCH WITH US

Sign up for our newsletter and stay up to date on technological innovations in the field of construction.

loading