GECO CEMENT plaster

BREATHABLE CEMENT-BASED PLASTER WITH FIBERS AND FINE FLOATED FINISH

GECO CEMENT plaster is a pre-mixed, breathable cement-based plaster with mineral fibers and a fine floated finish, classified as a renovation mortar (EN 998-1 R). It is used to plaster damp walls and ceilings, indoors and outdoors, in one or more coats.

It goes on thick – up to 1.18 in (30 mm) per coat – without sagging or cracking: anti-sagging additives keep the surface uniform, mineral fibers improve impact resistance and controlled shrinkage limits fissures. Its capillary water absorption is class W0, and because it is vapor-permeable it lets the wall dry out.

After 1.5-2 hours it can be floated to a smooth or slightly rough finish; after 24 hours it can be painted or covered.

NOTE

High thickness per coat
Waterproof and breathable
Fiber-reinforced
Controlled shrinkage

Gray powder; maximum particle size 0.059 in (1.5 mm).
Compressive strength: CS II; adhesion: > 87 psi (> 0.6 MPa).
Capillary absorption and water permeability: W0.
Water vapor permeability coefficient μ: ≤ 13.
Thermal conductivity: 2.77 BTU·in/(h·ft²·°F) (0.40 W/(m·K)) (declared value).
Reaction to fire: A1.
Thickness per coat: 0.197 to 1.18 in (5-30 mm); consumption: 7 lb/ft² per inch of thickness (1.35 kg/m² per mm); fresh density: 104 ± 1.9 lb/ft³ (1670 ± 30 kg/m³).
Mixing water: 1.1-1.3 gal (4.25-4.75 L) per bag; open time: 30 minutes; application between 41 °F (+5 °C) and 95 °F (+35 °C).
55 lb (25 kg) bags; pallet of 60 bags; shelf life 12 months in a dry place.

PACKAGING

Plastering of damp walls and ceilings in one or more coats, indoors and outdoors.
Renovation systems (EN 998-1 R) on concrete, aerated concrete, masonry, plasters, terracotta, brick and stone.
Second coat on the hardened first one for thicknesses over 1.18 in (30 mm).
Machine application: contact the Edilteco Technical Department.

DOWNLOADS